PLUG KIT:  Plugs (conical and countersink) and trim to fit tubing  Only the highest grade silicone and largest assortment of sizes are used in this kit. 225 pcs ensure that you have the right plug for the job. From conical shapes and countersink plugs all the way to “trim to fit” lengths of tubing, versatility is this kit’s main role in your shop.

PULL PLUG  KIT:  A stunning kit with plugs having a pull extension for removal

CAP KIT:  Do you have a variety of studs and non-threaded tubes to mask from your coating? 17 varieties and 184 pieces make the Mega Cap Kit the best choice for the discriminating coater. Clear silicone caps that provide positive seal and trim to fit tubing in high-impact colours.

FLANGE KIT:  Plugs have a flange to seal into the hole and a flange to sheid the thickness of the tube/ part

Mask-It is a liquid chemical maskant used as a stop off for anodising, chromate conversion coating and other plating. Mask-It is fast drying (usually an hour at room temperature) and is resistant to most chemical processes normally required to anodise or electroplate.

Mask-It is completely resistant to hot solutions up to 210°F and is tinted green for better scribe line visibility. The cured film is tack free and will not adhere to itself or other parts.

Apply one coat and allow 60 minutes to dry, then apply a second coat and allow 15 minutes to dry before putting into service.

PLUG KIT

PULL PLUG KIT

CAP KIT

MASK-IT 8 oz

MASK-IT 32 oz